ANTI-DAMP TREATMENT
ANTI-DAMP TREATMENT

PROBLEM SURFACES

ANTI-DAMP TREATMENT

MOISTURE BARRIER:
A damp seal treatment that blocks localised problem moisture, supplied ready to use. Apply with a brush or roller to damp substra...
  • Blocks problem moisture
  • Covers micro-cracks
  • Apply with brush or roller
Where to buy

Estimate quantities for levelling and smoothing

Characteristics

MOISTURE BARRIER:
A damp seal treatment that blocks localised problem moisture, supplied ready to use. Apply with a brush or roller to damp substrates such as cement, bricks, stone and old painted surfaces to block problem moisture on interior or exterior substrates. Covers micro cracks. Dries to a flexible film. Water-based.

Code
TTHS01GB
Surface condition
Interior
Task
Surface treatment
Application method
Manual
Time between coats
8 Hours
Surfaces
Damp substrates: cement, bricks, stone, old painted surfaces
Overcoat with
Any type of paint. Any type of wallpaper or Toupret filler.
Maximum recommended application thickness
/
Mixing rate
/
Ready to paint time
24 Hours
Working time
No limit
Application tools
Brush
Roller
Recommended temperature and humidity for application
Do not apply at a temperature below 5°C or above 35°C nor at a relative humidity over 80%.
Adhesion
/
Coverage g/m² (at 1mm thickness)
333.00
IAQ (Indoor Air Quality) classification
/
Colour when dry
White
Guarantee
Product guaranteed for 12 months from purchase, in original package and stored away from sunlight and frost.
Clean tools with
Water.
Pack sizes
  • Tin 1 KG

Technical documents

Datasheet

Download

Surfaces

Damp substrates: cement, bricks, stone, old painted surfaces

Directions for use

Do not apply in direct sunlight, overheated or frozen substrates.

Application

1

Apply manually using a brush or roller.

2

Can be painted 24 hours after application, dependant on the substrate, coat thickness, and ambient conditions