FINE SMOOTHING AND FINISHING
SMOOTHING FILLER
For smoothing out minor faults, broken surfaces, scratches and other imperfections up to 2mm deep prior to painting or wallpapering
- Covers broken surfaces, cracks and imperfections
- Fine texture
- Ready to use
Estimate quantities for levelling and smoothing
m²
- Characteristics
- Technical documents
- Surfaces
- Directions for use
Characteristics
For smoothing out minor faults, broken surfaces, scratches and other imperfections up to 2mm deep prior to painting or wallpapering
Code
SALIP07GB
Surface condition
Interior
Task
Fine smoothing surfaces
Application method
Manual
Time between coats
2 Hours
Surfaces
Painted or unpainted surfaces: gypsum plaster, cement, concrete, breeze blocks, bricks, stones, old painted surfaces, cellular concrete
Overcoat with
All types of paints and wallpapers. Any Toupret fillers
Application tools
Filling knife.
20cm blade.
20cm blade.
Recommended temperature and humidity for application
Do not apply at a temperature below +8°C or above +35°C nor at a relative humidity over 70%.
Adhesion
Adhesion filler/substrate (EN 16-566) : > 0,5 Mpa
Coverage g/m² (at 1mm thickness)
400.00
IAQ (Indoor Air Quality) classification
N/A
Colour when dry
White
Guarantee
Product guaranteed for 12 months from purchase, in original package and stored away from sunlight and frost.
Clean tools with
Water.
Pack sizes
- Tube 0.33 KG
- Tub 1 KG
- Bucket 4 KG
- Bucket 7 KG
- Bag 15 KG
Surfaces
Painted or unpainted surfaces: gypsum plaster, cement, concrete, breeze blocks, bricks, stones, old painted surfaces, cellular concrete
Directions for use
Once dry, It must be painted or overcoated.
Do not apply on bonded coatings.