EXTERIOR SURFACES
QUICK FILL EXTERIOR
ONE COAT EXTERIOR REPAIRS:
A quick drying and ready to use lightweight filler that offers a one coat fill with no shrinkage and can be painted over...
A quick drying and ready to use lightweight filler that offers a one coat fill with no shrinkage and can be painted over...
- Ready to paint in 1 hour
- Lightweight & ready to use
- Will not shrink or slump
- Rich in resin
- No need to seal the substrate *
- Characteristics
- Technical documents
- Surfaces
- Application
Characteristics
ONE COAT EXTERIOR REPAIRS:
A quick drying and ready to use lightweight filler that offers a one coat fill with no shrinkage and can be painted over in 1 hour. It is rich in resin for added strength. Overcoat with all types of water-based masonry or conventional paints. If using polyurethane or epoxy solvent-based paints, first prime with a water-based exterior paint.
A quick drying and ready to use lightweight filler that offers a one coat fill with no shrinkage and can be painted over in 1 hour. It is rich in resin for added strength. Overcoat with all types of water-based masonry or conventional paints. If using polyurethane or epoxy solvent-based paints, first prime with a water-based exterior paint.
Code
TTTLX04GB
Surface condition
Exterior
Task
Filling and repairing (holes, gaps, cracks)
Application method
Manual
Time between coats
As soon as the filler is dry
Surfaces
Painted or unpainted substrates: gypsum plaster, cement, concrete, breeze blocks, bricks, stones, old painted surfaces, cellular concrete
Overcoat with
All types of waterborne or mineral paints: waterproofing coatings and Toupret exterior fillers. Do not cover straight over with polyurethane or solvent-based epoxy paints, unless primed with a waterborne exterior paint
Maximum recommended application thickness
No depth limitation
Mixing rate
/
Ready to paint time
1 Hour.
Working time
No limit
Application tools
Blade.
Filling knife.
Trowel.
Filling knife.
Trowel.
Recommended temperature and humidity for application
Do not apply at a temperature below 5°C or above 35°C nor at a relative humidity over 80%.
Adhesion
Adhesion filler/substrate (EN 16-566): > 0.8 Mpa
Coverage g/m² (at 1mm thickness)
/
IAQ (Indoor Air Quality) classification
N/A
Colour when dry
Light grey
Guarantee
Product guaranteed for 12 months from purchase, in original package and stored away from sunlight and frost.
Clean tools with
Water.
Pack sizes
- Tub 1 L
- Bucket 4 L
Surfaces
Painted or unpainted substrates: gypsum plaster, cement, concrete, breeze blocks, bricks, stones, old painted surfaces, cellular concrete
Application
1
Remove any loose debris and dust the hole ready for filling
2
Fill the hole liberally using a filling knife, being sure to not to miss small cavities as you go.
3
Level the surface, passing over the area in different directions
4
Once the filler is dry, sand if necessary and dust off
5
Paint