EXTERIOR SURFACES
QUICK FILL EXTERIOR
ONE COAT EXTERIOR REPAIRS:
A quick drying and ready to use lightweight filler that offers a one coat fill with no shrinkage and can be painted over...
A quick drying and ready to use lightweight filler that offers a one coat fill with no shrinkage and can be painted over...
- Ready to paint in 1 hour
- Lightweight & ready to use
- Will not shrink or slump
- Rich in resin
- No need to seal the substrate *
- Characteristics
- Technical documents
- Surfaces
- Application
Characteristics
ONE COAT EXTERIOR REPAIRS:
A quick drying and ready to use lightweight filler that offers a one coat fill with no shrinkage and can be painted over in 1 hour. It is rich in resin for added strength. Overcoat with all types of water-based masonry or conventional paints. If using polyurethane or epoxy solvent-based paints, first prime with a water-based exterior paint.
A quick drying and ready to use lightweight filler that offers a one coat fill with no shrinkage and can be painted over in 1 hour. It is rich in resin for added strength. Overcoat with all types of water-based masonry or conventional paints. If using polyurethane or epoxy solvent-based paints, first prime with a water-based exterior paint.
Code
TTTLX04GB
Surface condition
Exterior
Task
/
Application method
Manual
Time between coats
As soon as the filler is dry
Surfaces
Painted or unpainted substrates: gypsum plaster, cement, concrete, breeze blocks, bricks, stones, old painted surfaces, cellular concrete
Overcoat with
All types of waterborne or mineral paints: waterproofing coatings and Toupret exterior fillers. Do not cover straight over with polyurethane or solvent-based epoxy paints, unless primed with a waterborne exterior paint
Maximum recommended application thickness
No depth limitation
Mixing rate
/
Ready to paint time
1 Hour.
Working time
No limit
Application tools
Blade.
Taping knife.
Trowel.
Taping knife.
Trowel.
Recommended temperature and humidity for application
Do not apply at a temperature below 5°C or above 35°C nor at a relative humidity over 80%.
Adhesion
Adhesion filler/substrate (EN 16-566): > 0.8 Mpa
Coverage g/m² (at 1mm thickness)
/
IAQ (Indoor Air Quality) classification
N/A
Colour when dry
Light grey
Guarantee
Product guaranteed for 12 months from purchase, in original package and stored away from sunlight and frost.
Clean tools with
Water.
Pack sizes
- Tub 1 L
- Bucket 4 L
Surfaces
Painted or unpainted substrates: gypsum plaster, cement, concrete, breeze blocks, bricks, stones, old painted surfaces, cellular concrete
Application
1
Remove any loose debris and dust the hole ready for filling
2
Fill the hole liberally using a filling knife, being sure to not to miss small cavities as you go.
3
Level the surface, passing over the area in different directions
4
Once the filler is dry, sand if necessary and dust off
5
Paint