EXTERIOR SURFACES
SKIMCOAT FILLER
FOR SMOOTHING DAMAGED & ROUGH MASONRY & RENDER:
Provides a smooth, ready to paint surface. Ideal for large surface areas thanks to its smooth appli...
Provides a smooth, ready to paint surface. Ideal for large surface areas thanks to its smooth appli...
- Extra smooth
- Easy to spread
- Long working time
- Allows the substrate to breathe
- No need to seal the substrate *
Estimate quantities for levelling and smoothing
m²
- Characteristics
- Technical documents
- Surfaces
- Directions for use
- Application
- Your questions
Characteristics
FOR SMOOTHING DAMAGED & ROUGH MASONRY & RENDER:
Provides a smooth, ready to paint surface. Ideal for large surface areas thanks to its smooth application. Offers excellent adhesion to all types of new or renovated surfaces: masonry, cement, concrete, plaster, mortars and renders. Overcoat with all types of water-based masonry or conventional paints. If using polyurethane or epoxy solvent-based paints, first prime with a water-based exterior paint.
The typical recommended application thickness is 1.5mm.
Warning - Please carefully follow usage instructions and refer to the technical data sheet.
Provides a smooth, ready to paint surface. Ideal for large surface areas thanks to its smooth application. Offers excellent adhesion to all types of new or renovated surfaces: masonry, cement, concrete, plaster, mortars and renders. Overcoat with all types of water-based masonry or conventional paints. If using polyurethane or epoxy solvent-based paints, first prime with a water-based exterior paint.
The typical recommended application thickness is 1.5mm.
Warning - Please carefully follow usage instructions and refer to the technical data sheet.
Code
TTEGFAPO15GB
Surface condition
Exterior
Task
Levelling uneven surfaces
Application method
Manual
Spray machine
Spray machine
Time between coats
As soon as the filler is dry
Surfaces
Any type of filler
Cement mortars and renders
Concrete, cellular concrete
Plaster and lime mortars and renders
Shuttered concrete
Cement mortars and renders
Concrete, cellular concrete
Plaster and lime mortars and renders
Shuttered concrete
Overcoat with
Skimcoat Filler can be overcoated with any type of filler, paint or wall coating. Do not coat directly with polyurethane paints nor epoxy solvent based paints.
Maximum recommended application thickness
Up to 5 mm.
Mixing rate
/
Ready to paint time
24 to 48 Hours
Working time
6 Hours
Application tools
Filling knife
Filling knife.
Trowel.
Filling knife.
Trowel.
Recommended temperature and humidity for application
Do not apply at a temperature below 5°C or above 35°C nor at a relative humidity over 80%.
Adhesion
Adhesion filler/substrate (EN 16-566): > 0.8 Mpa
Coverage g/m² (at 1mm thickness)
1200.00
IAQ (Indoor Air Quality) classification
N/A
Colour when dry
White
Guarantee
Product guaranteed for 6 months from purchase, in original package and stored away from humidity.
Clean tools with
Water.
Pack sizes
- Bag 5 KG
- Bag 15 KG
Surfaces
Any type of filler
Cement mortars and renders
Concrete, cellular concrete
Plaster and lime mortars and renders
Shuttered concrete
Cement mortars and renders
Concrete, cellular concrete
Plaster and lime mortars and renders
Shuttered concrete
Directions for use
It is advisable not to reshuffle the dough when it begins to harden.
Application
1
Mixing rate: Add 300ml water per 1kg powder (30%).
Add powder to water at room temperature. Stir until smooth.
Add powder to water at room temperature. Stir until smooth.
2
Apply manually using a coating blade or trowel up to 5mm deep.
3
Can be painted 24-48 hours after application, dependant on the substrate, coat thickness, and ambient conditions