PLASTERBOARD FINISHING SOLUTIONS
FINISH FILLER
Ready ready to use finishing surface filler for plasterboard.
- - EASY TO SAND
- - EXCELLENT FINISH
- - NO NEED TO SPOT PRIME
- - SMOOTH APPLICATION
Estimate quantities for levelling and smoothing
m²
- Characteristics
- Technical documents
- Surfaces
- Directions for use
Characteristics
Ready ready to use finishing surface filler for plasterboard.
Code
/
Surface condition
/
Task
/
Application method
/
Time between coats
Second coat as soon as the filler is hard and dry to the touch.
Surfaces
Finish Filler can be applied on gypsum, old painted surfaces, cement, concrete, cellular concretend any type of butted or tapered plasterboard.
Overcoat with
Finish Filler can be coated with any type of primer or surface filler.
Maximum recommended application thickness
Up to 5 mm.
Mixing rate
Ready to Use.
Ready to paint time
12 to 24 Hours
Working time
No limit
Application tools
Filling knife.
Coating blade
20cm blade.
Coating blade
20cm blade.
Recommended temperature and humidity for application
Do not apply at a temperature below +8°C or above +35°C nor at a relative humidity over 70%.
Adhesion
Adhesion filler/substrate (EN 16-566) : > 0,5 Mpa
Coverage g/m² (at 1mm thickness)
1700.00
IAQ (Indoor Air Quality) classification
/
Colour when dry
White
Guarantee
/
Clean tools with
Water.
Pack sizes
Surfaces
Finish Filler can be applied on gypsum, old painted surfaces, cement, concrete, cellular concretend any type of butted or tapered plasterboard.
Directions for use
Once dry, It must be painted or overcoated.
Do not apply on exterior surfaces.
Do not apply in direct sunlight, overheated or frozen substrates.
Do not apply over polystyrene.
Do not apply on damp grounds.