PLASTERBOARD FINISHING SOLUTIONS
JOINT FILLER 3 HOUR
TOUPRET Joint Filler 3 Hour is suitable for plasterboard jointing and filling. It has a working time of 3 hours, allowing you to fill more joints in f...
- 3 Hour working time
- Adheres to painted surfaces
- Easy to sand
- Suitable for patching
Estimate quantities for levelling and smoothing
m²
- Characteristics
- Technical documents
- Surfaces
- Directions for use
Characteristics
TOUPRET Joint Filler 3 Hour is suitable for plasterboard jointing and filling. It has a working time of 3 hours, allowing you to fill more joints in fewer batches. It's easy to sand, and adheres to painted surfaces, for general filling work, with no shrinkage and no depth limit. It can be applied to gypsum plaster, plasterboard/drywall and old painted surfaces.There is no need to prime or seal the surface before application.Suitable for interior use. Overcoat with any filler, conventional paints and wall coverings.Conforms to BS EN 13963 for jointing applications.
Code
FGJ3H15GB
Surface condition
Interior
Task
Filling and repairing (holes, gaps, cracks)
Jointing plasterboard
Jointing plasterboard
Application method
Manual
Time between coats
4 Hours
Surfaces
Joint Filler 3 Hour can be applied to:
Gypsum plaster, plasterboard/drywall and old painted surfaces.
There is no need to prime or seal the surface before application.
Gypsum plaster, plasterboard/drywall and old painted surfaces.
There is no need to prime or seal the surface before application.
Overcoat with
Joint Filler 3 Hour can be overcoated with any type of filler, paint or wall coating.
Maximum recommended application thickness
Suitable for small filling jobs.
Mixing rate
42% water
Ready to paint time
24 Hours
Working time
3 Hours
Application tools
Taping knife.
Trowel / smoother.
Trowel / smoother.
Recommended temperature and humidity for application
Do not apply at a temperature below +8°C or above +35°C nor at a relative humidity over 70%.
Adhesion
Adhesion filler/substrate (EN 16-566) : > 0,5 Mpa
Coverage g/m² (at 1mm thickness)
1100.00
IAQ (Indoor Air Quality) classification
/
Colour when dry
White
Guarantee
Product guaranteed for 12 months from purchase, in original package and stored away from humidity
Clean tools with
Water.
Pack sizes
- Bag 15 KG
- Bag 25 KG
Surfaces
Joint Filler 3 Hour can be applied to:
Gypsum plaster, plasterboard/drywall and old painted surfaces.
There is no need to prime or seal the surface before application.
Gypsum plaster, plasterboard/drywall and old painted surfaces.
There is no need to prime or seal the surface before application.
Directions for use
Do not apply on exterior surfaces.
Do not apply in direct sunlight, overheated or frozen substrates.
Do not apply on bonded coatings.
Do not apply over polystyrene.
Do not apply on damp grounds.