PATCH & REPAIR FILLER: READY TO USE
PATCH & REPAIR FILLER: READY TO USE
PATCH & REPAIR FILLER: READY TO USE

PLASTERBOARD FINISHING SOLUTIONS

PATCH & REPAIR FILLER: READY TO USE

READY TO USE REPAIR FILLER FOR GAPS, CRACKS, SCRATCHES AND HOLES:
On plasterboard and other interior surfaces. Easy to sand, with minimal shrinkage...
  • Easy to sand
  • Excellent adhesion
  • No need to spot prime
  • Does not flash or grin
Where to buy

Characteristics

READY TO USE REPAIR FILLER FOR GAPS, CRACKS, SCRATCHES AND HOLES:
On plasterboard and other interior surfaces. Easy to sand, with minimal shrinkage and no need to spot prime. Won’t flash or grin.

Code
FGRP1.5GB
Surface condition
Interior
Task
Filling and repairing (holes, gaps, cracks)
Application method
Manual
Time between coats
As soon as the filler is dry
Surfaces
Painted or unpainted substrates: gypsum plaster, plasterboard, old painted surfaces, any fillers in the Toupret range, cement, concrete, cellular concrete, breeze blocks, bricks, stone
Overcoat with
Any fillers in the Toupret range, any conventional paints and wall coverings
Maximum recommended application thickness
Up to 1 cm.
Mixing rate
Ready to Use.
Ready to paint time
12 to 24 Hours
Working time
No limit
Application tools
Filling knife.
20cm blade.
Trowel / smoother.
Airless machine gun
Recommended temperature and humidity for application
Do not apply at a temperature below +8°C or above +35°C nor at a relative humidity over 70%.
Adhesion
Adhesion filler/substrate (EN 16-566) : > 0,5 Mpa
Coverage g/m² (at 1mm thickness)
/
IAQ (Indoor Air Quality) classification
N/A
Colour when dry
White
Guarantee
Product guaranteed for 12 months from purchase, in original package and stored away from sunlight and frost.
Clean tools with
Water.
Pack sizes
  • Bucket 1.50 KG

Technical documents

Datasheet

Download

Surfaces

Painted or unpainted substrates: gypsum plaster, plasterboard, old painted surfaces, any fillers in the Toupret range, cement, concrete, cellular concrete, breeze blocks, bricks, stone

Directions for use

Once dry, It must be painted or overcoated.

Video

Viewing this video may result in the use of cookies by the video platform partner. Given your refusal to accept cookies, and out of respect for your choice, we have blocked the playback of this video. If you wish to continue viewing, please give us your consent by clicking on the button below.

Application

1

Apply manually using a coating blade or trowel.

2

Fill up to 10mm

3

Can be painted 12-24 hours after application, dependant on the substrate, coat thickness, and ambient conditions

Your questions

See all

Can interior fillers be used on wood?