EXTERIOR SURFACES
MASONRY REPAIR FILLER
CAN BE APPLIED TO DRY OR DAMP MASONRY:
Will fill without shrinking to any depth limit and repair without formwork. Weather resistant, it's also eas...
Will fill without shrinking to any depth limit and repair without formwork. Weather resistant, it's also eas...
- Weather resistant
- Shapeable - repair without formwork
- No need to seal the substrate *
- Characteristics
- Technical documents
- Surfaces
- Directions for use
- Application
- Your questions
Characteristics
CAN BE APPLIED TO DRY OR DAMP MASONRY:
Will fill without shrinking to any depth limit and repair without formwork. Weather resistant, it's also easy to shape. Can be used on all rough masonry surfaces: cement, concrete, breeze blocks, bricks and stones. Overcoat 48-72 hours from application with any standard water-based masonry paint or mineral paint. If using polyurethane or epoxy solvent-based paints, first prime with a water-based exterior paint.
Warning - Please carefully follow usage instructions and refer to the technical data sheet.
Will fill without shrinking to any depth limit and repair without formwork. Weather resistant, it's also easy to shape. Can be used on all rough masonry surfaces: cement, concrete, breeze blocks, bricks and stones. Overcoat 48-72 hours from application with any standard water-based masonry paint or mineral paint. If using polyurethane or epoxy solvent-based paints, first prime with a water-based exterior paint.
Warning - Please carefully follow usage instructions and refer to the technical data sheet.
Code
TTTHR15GB
Surface condition
Exterior
Task
Filling and repairing (holes, gaps, cracks)
Shaping and repairing without formwork
Shaping and repairing without formwork
Application method
Manual
Time between coats
As soon as the filler is dry
Surfaces
Can be applied to all rough masonry
surfaces damp or dry: cement, concrete, breeze blocks, bricks and stone.
surfaces damp or dry: cement, concrete, breeze blocks, bricks and stone.
Overcoat with
Can be overcoated with any type of filler, paint or wall coating.
Do not coat directly with polyurethane paints nor epoxy solvent based paints.
Do not coat directly with polyurethane paints nor epoxy solvent based paints.
Maximum recommended application thickness
No depth limitation
Mixing rate
/
Ready to paint time
48 to 72 Hours
Working time
30 min
Application tools
Filling knife
Filling knife.
Trowel.
Filling knife.
Trowel.
Recommended temperature and humidity for application
Do not apply at a temperature below 5°C or above 35°C nor at a relative humidity over 80%.
Adhesion
Adhesion filler/substrate (EN 16-566): > 0.8 Mpa
Coverage g/m² (at 1mm thickness)
/
IAQ (Indoor Air Quality) classification
N/A
Colour when dry
Light grey
Guarantee
Product guaranteed for 6 months from purchase, in original package and stored away from humidity.
Clean tools with
Water.
Pack sizes
- Box 1.50 KG
- Bag 5 KG
- Bag 15 KG
Surfaces
Can be applied to all rough masonry
surfaces damp or dry: cement, concrete, breeze blocks, bricks and stone.
surfaces damp or dry: cement, concrete, breeze blocks, bricks and stone.
Directions for use
Do not cover directly with polyurethane and epoxy paint in solvent phase.
Application
1
Mixing rate: Add 350ml water per 1kg powder (35%).
Add powder to water at room temperature. Stir until smooth.
Add powder to water at room temperature. Stir until smooth.
2
Apply manually using a coating blade or trowel. No fill depth limit.
3
Can be painted 48-72 hours after application, dependant on the substrate, coat thickness, and ambient conditions